As already mentioned in the previous article, it is always advisable to optimally parameterize the temperatures of the extrusion cylinder to avoid production problems and to ensure economical and productive production. Optimizing cylinder temperatures while production is running is not an easy task and is therefore often avoided due to […]
Polyolefines
6 posts
Blocking of films is the most frequent cause of complaints about films. In some light cases, the problem is only a slight quality defect, but in more extreme cases it leads to large quantities of rejects, as entire rolls have to be disposed of on which blocking has occurred. […]
Extrusion cylinders are generally divided into smooth barrel extruders (conventional extruders) and grooved extrusion cylinders (grooved barrel extruders, helibars, etc.). The differences between the different systems lie, as the name suggests, in the design of the extruder barrel. While the conventional extruder has a completely smooth cylinder, a grooved system […]
In order to achieve a high product quality, additives are added to the raw materials, which cause a change or improvement of the product properties. Nowadays plastic products are often used in areas where the use of pure plastics would be unthinkable. After the melting zone of the extrusion screw […]
The screw of an extruder is considered as the “heart” of the machine and can have a significant influence on the achievable product quality, the achievable maximum throughput and the efficiency of the production plant. There are different basic concepts of screw design, which have different advantages and disadvantages. In […]
Due to the poor thermal conductivity of thermoplastics, residual stresses (tensile and compressive residual stresses) are build up in the walls of the product during cooling processes after extrusion. Deformations and distortion of the products often result from the residual stresses, whereby the presence of the residual stresses becomes visible. […]